# Switch from default mass storage device mode 12d1:1f01 to. The usb_modewitch partĬontent of /etc/usb_modeswitch.d/12d1:1f01 # Huawei E353 (3.se) and others With that, I can configure usb_modeswitch to react to the insertion of a 12d1:1f01 device. In my case, I had this line in /var/log/kern.log : usb 1-1: New USB device found, idVendor=12d1, idProduct=1f01 You need to watch your /var/log/kern.log (or use dmesg) to figure out what the initial productID is. I was used to the lsusb command to list my devices, but the problem with this kind of devices is that it changes its
#Huawei e3531 usb modem android
# Generic entry for most Huawei devices, excluding Android phonesĪTTRS="08", RUN+="usb_modeswitch '%b/%k'"īasically, it asks udev to run usb_modeswitch as soon as a Huawei USB device, which is not an Android phone, is plugged into the linux system. SUBSYSTEM!="usb", ACTION!="add", GOTO="modeswitch_rules_end"
The solution described here was found after much documentation gatheringĬontent of /etc/udev/rules.d/40-usb_les ACTION!="add|change", GOTO="modeswitch_rules_end" The actual mode switch will be performed by usb_modeswitch, which is available in standard repositories for Debian-like We'll use udev rules to force the surf stick to a specific mode as soon as it is plugged in. Once it has switched mode, it cannot revert to any other mode. It can also be a plain old modem or a WWAN card. By defaut, this is a network card (virtually connected to a router),
#Huawei e3531 usb modem install
It appears first as CD-ROM-like device, so that Windows users can install theirĭriver, then switches mode to appear as "something else". This Huawei Surf stick has several USB mode. Linux is currently Ubuntu, Debian or Raspbian should be similar The problem May be a valuable insight for more modern surf sticks like Huawei E8231 and the likes. Installing Huawei E3531 Surf Stick on Linux
0 kommentar(er)
